vending
snakky

Snakky - Compact and Highly Flexible Vending Machine

Snakky is the first snack vending machine made by Necta with a height
of only 1700 mm, however, can be increased to 1830 mm by fitting the
optional lift-up kit. The compact Snakky offers the ideal refreshment
service to medium size locations and sites where space is limited, due to
its size and innovative design. Side panels provide a useful hot-air outlet,
which allows the Snakky to be placed against a wall without damaging
the cooling unit, thus saving 10 cm from the machine depth. However,
it is still possible to have the air outlet from the back panel if preferred.

  • Maximum use of size/capacity ratio
  • Ergonomic delivery bin
  • Advanced 16-bit electronic control (master/slave with Kikko/Snakky SL)
  • Highly recyclable due to the new type of insulation
  • Lock with programmable code
  • Slide-in cooling unit
  • Designed to co-ordinate with the Kikko drinks machine
  • Side air vents allow the Snakky to be placed against a wall without damaging the cooling unit
Download Broucher
0 +

Active Installations

0 +

Loyal Customer

0 +

Brnad Integrations

0 +

Awands

INNOVATIONS

Affordable Pricing Plans

Snakky has an ergonomic delivery bin (patented) with anti-theft device and slow closing movement, using a damper The delivery bin is very sturdy and the clever design allows each dispensed product to be clearly visible and easily collected. The new single block slide-in/slide-out cooling unit requires minimum maintenance, due to the new wire type condenser (household use), and is simple to remove. The payment systems and electronic board are located inside a separate slide-out compartment with independent access allowing operators to work in this area without affecting the temperature inside the product holding compartment. Snakky offers the option of dispensing 0.5 litre PET bottles, placed upside down, without the use of any accessory.

User Interface

The Snakky has been designed to co-ordinate with the Kikko drinks machine to offer a complete vending solution. However, looks stunning on its own or located next to other 1830 mm high machines, when fitted with the optional lift up kit. With its rounded shape, glass front door (with anodised aluminium frame and ergonomic
grooves for easy grip) and stylish foot cover panel the Snakky offers a stylish vending solution to medium size locations. Although compact, the Snakky offers flexibility and can dispense a large number of products including snacks, cans, bottles and Tetra-pak containers.

TEMPERATURE

The temperature of Snakky can be uniform (7-9°C min.), set via the software, or stratified (7-9°C approx. in the lower trays, 12-15°C in the upper trays), achieved by adjusting the airflow from the grille which is fitted as standard.

User Interface

  • Numeric membrane keypad with 12 keys + 4 direct selection buttons (option).
  • Tilted alphanumeric display, with 2 lines of 16 characters, allowing clear and complete messages to be viewed.
  • The ergonomic delivery bin opens outwards allowing products to be easily picked up – even with one hand.
  • A sound signal indicates a completed vend cycle.

ELECTRONIC CONTROL

The 16-bit electronic control with incorporated flash EPROM is extremely flexible and compatible with the PC application “Flash”. Through a palmtop with RS232 connection or the Up-Key, Flash allows the downloading of sales statistics (also in EVA-DTS format), the cloning of existing set-ups and the software updating. With Flash it is also possible to have remote monitoring of the machine using GSM technology. The Snakky can be banked alongside the Kikko and/or Snakky SL, using master or slave mode, which allows both machines to share a single payment system, combined selections or a single modem for GSM connections.grooves for easy grip) and stylish foot cover panel the Snakky offers a stylish vending solution to medium size locations. Although compact, the Snakky offers flexibility and can dispense a large number of products including snacks, cans, bottles and Tetra-pak containers.

PAYMENT SYSTEMS

The Snakky is pre-set for the installation of systems with Executive and MDB protocol as well as for the installation of validators.
At the same time the following can be fitted:
– Change-giver, validator or coin mechanism.
– Bill acceptor.
– Cashless system with key or card.
There are pre-cut panels to facilitate the above.

Accessories
  • Photocell kit
  • Coin box lid kit
  • Lift-up kit
  • Kit for dispensing 0.5 litre bottles in upright position
  • Document holder kit
  • Wall fixing brackets kit
  • Bidirectional drawer motors kit (for dispensing long products)
  • Master/slave connection kit
  • Rear panel kit (rear cover for Snakky/Snakky SL & Kikko installation
  • RS232 jack kit
  • Infrared kit
  • GSM kit
  • Instructions pocket
  • 4 direct selection buttons kit
https://legacywater.co.uk/wp-content/uploads/2024/03/contact-img2.png

Get Quote

http://wordpress.zcube.in/aquato/wp-content/uploads/2021/06/circle_left-1.png

Get in touch today and take the first step towards superior hydration!